Product Description:
polyurethane spray foam insulation is a multi-purpose, two component, closed-cell polyurethane foam
formula. These systems are both disposable and completely self - contained to provide flexibility
in end use performance thermal insulation, sealant, vibration absorption, flotation, sound or
condensation control.
Application:
Spray foam onto any dry, clean surface in any direction , even to the underside of a floor or deck.
This product is very adhesive and will stick to practically any surface to insulate, fill and seal
various size voids, deaden sounds or reduce vibration.
Properties:
Two component foam systems will begin to expand immediately upon chemical reaction of the "A,
component(a polymeric isocyanate)and "B,(a polyol blended with propriety additive ratios)component
chemicals.The foam will cure to a semi-rigid, closed-cell foam optimum application temperature of
the chemicals is 20to 30 and may be sprayed onto colder or warmer substrates, with slight effects
on the foams characteristics. Cured foams resistant to heat and cold to -30 to +100. It
is also resistant to any negative effects of aging. Cured foam is also chemically inert and
non-reactive in approved applications.

Technical Data:
Density: 1.7-2.8lbs./ft3 (28-45kgm3)
Tensile Strength: 310kPa
Compressive: 240kPa
Closed Cell Content: Greater Than 95.6 %
Tack Free Expansion Time: 30-60 sec.
Cuttable: 2-5 minutes
Non-flammable: B2
Shelf Time: 6 month
Tank Specs: 220kg(500pound)cylinders
Spray Machine: Gusmer,Glas-Craft,etc Component A:B=1:1